Job: Unigraphics NX6 or NX7.
Degreed engineer with experience.
Contact:
Joe Arellano, Jr.
Engineering Recruiter
Ryzen Solutions
jarellano@ryzen.com
408-993-1282 x 317
April 8, 2010
Job: Unigraphics NX6 or NX7. Degreed engineer with experience
April 7, 2010
Job; SolidWorks Technician
SolidWorks Technician
Temporary Part Time Position
San Carlos, CA
- Proficiency in SolidWorks 2D & 3D is a MUST
- Expert in Advanced Drawing Techniques.
- Must be able to work with minimal supervision
Email CV and salary requirements to: jleong@pencomsf.com
Jennifer Leong
Engineering Manager
Pencom
1300 Industrial Road, Suite 21
San Carlos, CA 94070
Tel: 650-593-3288
Fax: 650-593-3299
Intanna Technologies is looking for part time industrial designer with following skills.
Intanna Technologies is looking for part time industrial designer with following skills.
- Consumer electronics product experience
- Plastics, injection molding housing, stand design
- Must have skill of human interaction- how things should look/feel. In short- form/feel/fit/function!
- Must have mechanical aptitude and aware of how mechanical snaps. slides press-fit work etc.
- Must be good at free hand sketches and coming up a few concepts quickly from mass production (molding) point of view
- 3D modeling (surfaces)
Please reply only if you meet above skills. You will be asked first to show your skills on given samples and come up with a few sketches. If we approve, you will be given this proejct.
Sanjeev “Sam” Tanna, MS Engineering
Director of Engineering
Intanna Corporation, www.intanna.com
1001 South Main Street, J303
Milpitas, CA 95035
Office Phone: 408-898-7604
April 2, 2010
job
If you are qualified- let me know.
Gary
“We still have lots of opening here at Space Systems Loral for engineering jobs that require Proe. At least 2 years of on the job use of proe is required and it would be a plus if you have any aerospace work experience. Most jobs only require a AA degree with past related job experience in some engineering/drafting/design position.
It is best that you have any candidates forward their resumes to me so I can get them into HR personally. If they apply on their own, their resumes will sit on the large stack and most likely not be seen.”
April 1, 2010
Jobs- Intanna Corporation (www.intanna.com)
Intanna Corporation (www.intanna.com) is a fast growing, technology driven company. Intanna provides complete design, engineering, prototyping and manufacturing services to various bay area companies. Currently two openings.
Requirements
- Minimum B.S. Mechanical Engineer
- 3 to 7 years total experience (injection molded part design, machine parts, Solidworks, GD&T,
DFMA, Fixture design must!)
- email: samt@intanna.com with Title: (YOUR NAME), Mechnical+Manufacturing
- Cover letter with Salary requirements- must
Mechanical Engineer- Designer and Manufacturing Background
General Skills
- You will work without direction or least amount of direction from the day one. So
you must be “result oriented person”
- Team player, Positive, punctual, proactive and believe in delivering results 110%.
- Good listener, willing to learn.
Designer Skills
- Plastics Injection Molding Product design
- Solidworks 3D modeling and 2D skills (proficient)
- Design for Manufacturing and Engineering (DFMA) experience
- GD& T, ANSI Y14.5 standards, and Six sigma- must know
- Good understanding of material, machining, manufacturing and material processes
- Design of Electro-mechanical products
- Concept design layout, prototype and fixture/tooling design
- Fixture design for automation purpose.
- Work with customers and vendors
Manufacturing Skills
- Thinking out of the box
- Automated processes development
- Process Engineer with background in developing, writing
protocols/procedures/processes for mass production
- Kaizen and lean manufacturing experience is plus
- Responsible for defining methods, operations and sequences for qualification testing of components,
assemblies and products.
Principal Mechanical Engineer (Project Leader)
General Skills
- An individual to manage Mechanical Engineering group.
- Responsible for defining methods, operations and sequences for qualification testing of components, assemblies and products.
- This will include ensuring appropriate review of engineering designs during product development.
- Coordinate and interact with various groups and leaders.
- Develop detailed manufacturing packages for effective design transfer to manufacturing.
- Develop tests for mechanical hardware and ensure proper operation over the range of use.
Requirements
- BS degree or equivalent and 5+ years experience in a relevant technical discipline.
- Demonstrated ability to develop designs to meet project costs, performance and schedules.
- Proficient in 2D & 3D CAD for use in solid modeling individual mechanical components and assemblies (AutoCAD & SolidWorks preferred).
- Thorough understanding of machining, manufacturing and material processes, understanding of geometric tolerances, ANSI Y14.5 standards; experience using solid modeling in the manufacturing of injection moldings, die castings, and extrusions.
- Working knowledge of electro/mechanical design packaging, design and fabrication knowledge of injection molding, die cast, rapid prototyping, machined parts and associated tooling.
- Demonstrated understanding and success in new product introduction environments inclusive of DFM.
- Demonstrated success managing Mechanical Engineers.
Pro/ENGINEER Wildfire 5.0 by Louis Gary Lamit has been released
Pro/ENGINEER Wildfire 5.0 by Louis Gary Lamit has been released
Pro/ENGINEER® Wildfire™ 5.0, 1st Edition
Louis Gary Lamit - De Anza College
ISBN-10: 1439062021 ISBN-13: 9781439062029
720 Pages Paper bound
© 2011 Published
- Overview
- About the Author
- Table of Contents
- Features
Table of Contents
Lesson 1: Pro/ENGINEER Wildfire 5.0 Overview.
Lesson 2: Pro/ENGINEER Wildfire 5.0.
Lesson 3: Direct Modeling.
Lesson 4: Extrusions.
Lesson 5: Datums, Layers, and Sections.
Lesson 6: Revolved Features.
Lesson 7: Feature Operations.
Lesson 8: Assemblies.
Lesson 9: Exploded Assemblies and View Manager.
Lesson 10: Introduction to Drawings.
Lesson 11: Part Drawings.
Lesson 12: Assembly Drawings.
Lesson 13: Patterns.
Lesson 14: Blends.
Lesson 15: Sweeps.
Lesson 16: Helical Sweeps and 3D Model Notes.
Lesson 17: Shell, Reorder, and Insert Mode.
Lesson 18: Drafts, Suppress, and Text Extrusions.
Appendix.
Index.
Pro/ENGINEER® Wildfire™ 5.0, 1st Edition
Louis Gary Lamit - De Anza College
ISBN-10: 1439062021 ISBN-13: 9781439062029
720 Pages Paper bound
© 2011 Published
- Overview
- About the Author
- Table of Contents
- Features
Table of Contents
Lesson 1: Pro/ENGINEER Wildfire 5.0 Overview.
Lesson 2: Pro/ENGINEER Wildfire 5.0.
Lesson 3: Direct Modeling.
Lesson 4: Extrusions.
Lesson 5: Datums, Layers, and Sections.
Lesson 6: Revolved Features.
Lesson 7: Feature Operations.
Lesson 8: Assemblies.
Lesson 9: Exploded Assemblies and View Manager.
Lesson 10: Introduction to Drawings.
Lesson 11: Part Drawings.
Lesson 12: Assembly Drawings.
Lesson 13: Patterns.
Lesson 14: Blends.
Lesson 15: Sweeps.
Lesson 16: Helical Sweeps and 3D Model Notes.
Lesson 17: Shell, Reorder, and Insert Mode.
Lesson 18: Drafts, Suppress, and Text Extrusions.
Appendix.
Index.
March 21, 2010
Spring term Pro/E CDI70, 71, 72 and GD&T distance learning classes
Would everyone contact their supervisor, friends and co-workers and let them know about Spring term Pro/E CDI70, 71, 72 distance learning classes?
- You will have a course interface system called Catalyst to access EVERYTHING for the class including Lectures (for CDI 70 and 71 [no lectures for CDI72]).
- You buy the book and download the free software from PTC. Follow the steps on Catalyst and complete the work.
- Everything is online- outlines, green sheets, tests, surveys, grades, etc.
- You may stop by any evening in my class. We averaged 15 open stations an evening this term after we introduced Catalyst.
- Sign up for a Sat. CDI100 lab if you wish to come in on Saturdays.
-
Shaded classes are distance: http://www.deanza.edu/schedule/classes/schsearch.html
Department: CAD and Digital Imaging (new window)
|
|
||||||
| Call # | Course | Title | Time | Days | Instructor | Location |
|
|
||||||
| 2838 | * CDI -051.-64Z |  Geometric Dimensioning and Tolerancing (L-L) |
TBA | TBA | BENZIO JR | LC107 |
|
|
||||||
| 0432 | CDI -056.-65R | Special Projects in CAD (LAB) | TBA | TBA | LAMIT | TBA |
|
|
||||||
| 0433 | CDI -056X-65R | Special Projects in CAD (LAB) | TBA | TBA | LAMIT | TBA |
|
|
||||||
| 0434 | CDI -056Y-65R | Special Projects in CAD (LAB) | TBA | TBA | LAMIT | TBA |
|
|
||||||
| 2845 | CDI -060D-01 | SolidWorks (Beginning) (L-L) | 8:30AM-12:15 | TTh | KLINGMAN | AT301 |
|
|
||||||
| 2846 | CDI -060D-61 | SolidWorks (Beginning) (L-L) | 6:00PM- 9:45 | TTh | KLINGMAN | AT301 |
|
|
||||||
| 2847 | CDI -061D-01 | SolidWorks (Intermediate) (L-L) | 8:30AM-12:15 | MW | KLINGMAN | AT301 |
|
|
||||||
| 2848 | CDI -062D-01 | SolidWorks (Advanced) (L-L) | 8:30AM-12:15 | MW | KLINGMAN | AT301 |
|
|
||||||
| 2849 | CDI -063D-61 | SolidWorks (SURFACES) (L-L) | 6:00PM- 9:45 | MW | TANNA | AT301 |
|
|
||||||
| 2864 | CDI -069D-01 | SolidWorks (Update) (L-L) | 8:30AM-12:15 | TTh | KLINGMAN | AT301 |
|
|
||||||
| 2858 | * CDI -070D-64Z | Pro/ENGINEER Wildfire 5.0 (Beginning) (L-L) |
TBA | TBA | LAMIT | LC107 |
|
|
||||||
| 2850 | CDI -070D-61 | Pro/ENGINEER Wildfire 5.0 (Beginning) (L-L) | 6:00PM- 9:45 | MW | LAMIT | AT313 |
|
|
||||||
| 2853 | * CDI -071D-64Z | Pro/ENGINEER Wildfire 5.0 (Intermediate) (L-L) |
TBA | TBA | LAMIT | LC107 |
|
|
||||||
| 2852 | CDI -071D-61 | Pro/ENGINEER Wildfire 5.0 (Intermediate) (L-L) | 6:00PM- 9:45 | TTh | LAMIT | AT313 |
|
|
||||||
| 2854 | * CDI -072D-64Z | Pro/ENGINEER Wildfire 5.0 (Advanced) (L-L) |
TBA | TBA | LAMIT | LC107 |
|
|
||||||
| 2855 | CDI -076D-01L | Pro/ENGINEER Wildfire 5.0 (Pro/CABLE) (L-L) | 8:30AM- 4:20 | S | GEE | AT313 |
|
|
||||||
| 2856 | CDI -079D-61 | Pro/ENGINEER Wildfire 5.0 (Pro/ Update) (L-L) | 6:00PM- 9:45 | MW | LAMIT | AT313 |
|
|
||||||
| 2857 | CDI -079D-62 | Pro/ENGINEER Wildfire 5.0 (Pro/ Update) (L-L) | 6:00PM- 9:45 | TTh | LAMIT | AT313 |
|
|
||||||
| 2859 | CDI -080C-01 | AutoCAD (Beginning) (L-L) | 8:30AM- 4:20 | S | KEITH | AT301 |
|
|
||||||
| 2860 | CDI -081C-01 | AutoCAD (Intermediate) (L-L) | 8:30AM- 4:20 | S | KEITH | AT301 |
|
|
||||||
| 0452 | CDI -100Z-01 | CAD Technology Laboratory (LAB) | 12:30PM- 1:55 | MTWTh | KLINGMAN | AT301 |
|
|
||||||
| 2861 | CDI -100Z-01L | CAD Technology Laboratory (LAB) | 10:30AM- 4:10 | S | GEE | AT313 |
|
|
||||||
| 0453 | CDI -100Z-02 | CAD Technology Laboratory (LAB) | 6:00PM- 8:45 | TTh | LAMIT | AT313 |
|
|
||||||
| 0455 | CDI -100Z-03 | CAD Technology Laboratory (LAB) | 4:30PM- 5:50 | MTWTh | LAMIT | AT301 |
|
|
||||||
| 2863 | CDI -100Z-04 | CAD Technology Laboratory (LAB) | 6:00PM- 8:45 | MW | LAMIT | AT313 |
March 19, 2010
De Anza User group Meeting. CAD Event-PLM/PDM. CAD Event and Job Fair
De Anza College
21250 Stevens Creek Blvd
Cupertino, Ca 95014
March 23rd
Event-Student Campus Center 5:30-8:30 (no RSVP)
Workshops- ATC 313 and 301 3:30-5:30 (RSVP)
Contact De Anza Users Group (CAD@cad-resources.com)
Advanced Technology Center-map
De Anza User group Meeting. CAD Event-PLM/PDM. CAD Event and Job Fair
Location:
De Anza College Student Center
Conference Rooms A and B 5:30-8:30PM
De Anza College
ATC 313
21250 Stevens Creek Blvd
Cupertino, Ca 95014
De Anza CDI CAD User Group Meeting
CAD Event and CAD Job Fair
Product Life-cycle Management and Product Data Management (PLM/PDM)
EVENT:
De Anza User group Meeting. CAD Event-PLM/PDM. CAD Event and Job Fair
Tuesday March 23th 2010
Food and Refreshments will be provided.
Evening Session Presentations
6:00 Solopoint- state of the local engineering community
6:45 GoEngineer PDM and document management best practices and PLM integration.
7:15 NxRev
PTC PDM/PLM
8:00 SolidWorks PLM
Afternoon Workshop Sessions
ATC
Session 1: Room 301
3:30-4:30PM
Topics: Roundtable style discussion/ Q and A session to educate and clarify on issues regarding PDM, PLM, ERP, and MRP
Session 2: Room 301
4:30-5:30PM
Topics: PLM/PDM keytech PLM Inc. www.keytechplm.com
Session 3: Room 313
3:30-4:30PM
Topic: PLM/PDM
Nathan Stump
Technical Sales Manager, PDM
Mobile: +1 650 483 5409
Nathan.Stump@3ds.com
Dassault Systèmes SolidWorks Corp.
Session 4: Room 313
4:30-5:30PMTopic: PTC Pro/E PDM/PLM
NxRev
Scott Carmichael
Door Prizes:
Students Editions of:
10 copies of SolidWorks
5 copies of Pro/ENGINEER
5 copies ACAD
5 copies Inventor
5 copies of Revit
10 NX
Books:
Copies of ACAD, SW, and Pro/E textbooks and reference CAD books
Booths:
1.MegaRoller, Inc.
2. Keytech PLM Inc. www.keytechplm.com
3. SoloPoint
4. Pro/SOURCE
5. VEG (Valley Engineering Group)
6. GoEngineer
7. SolidWorks
8. Bowley Consulting LLC
9. Peak Solutions LLC Representing ZCorp 3d printers and hand-held 3d scanners.
10.Cengage Learning
11.NxRev
March 17, 2010
Job: Pro-E Drafter position
Pro-E Drafter position immediately available. 6 months temp to hire!! The pay rate is non-negotiable at $20/hr. Please do not apply to this position unless you have proficient knowledge in BOTH Pro-E and GD&T and are looking for a long term position with a Fortune 500 Medical Company.
Kim-Khanh Tran | Sr. Service Manager Ledgent & Ultimate Staffing Services 3945 Freedom Circle Suite 220 Santa Clara, CA 95054 (T) 408.330.6990 (F) 408.988.8460 ktran@ultimatestaffing.com | www.ultimatestaffing.com We love to create remarkable experiences… every person, every time.®
General Description:
Under general to minimal supervision performs computerized graphic operations on products and component parts and writes and edits drawings with respect to engineering change orders. Prepares and/or updates simple detail drawings showing all necessary section views and dimensions.
Essential Functions:
- Digitizes, edits and revises computerized graphics of component parts, subassemblies and final assemblies.
- Utilizes primarily CAD/CAE equipment, to edit and draft hard copy prints.
- Will use GD&T tolerancing.
- Will coordinate with others to ensure dimensions on drawings are accurate and complete.
- Will do basic maintenance programming for CAD file management.
- Will design basic or narrowly defined components as assigned.
- Will write engineering change orders and help with blueprint filing system as necessary.
- May provide CAD training to others.
- Will transfer and translate drawings from one computer system to another as assigned.
QUALIFICATIONS:
- Sedentary work: Exerting up to 10 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, etc. Generally involves sitting most of the time.
- Must be able to review printed materials.
- Must be able to use common CAD equipment (e.g. keyboard, computer screen, plotter, digitizing pen, etc.) and common manual drafting equipment.
- Must be proficient in GD&T tolerencing.
- Must be able to create and design in 3-D wireframe and solids.
- Must be able to analyze and resolve routine CAD issues of a moderate scope using independent judgment.
- Must be able to observe and correct minute inconsistencies (e.g. in the printed word, design appearance, etc.).
- Excellent computer drafting and design skills; familiarity with Pro/Engineer, AutoCAD or similar automated drafting equipment preferred.
- Effective interpersonal skills.
- Effective analytical skills.
- Demonstrated drafting and design problem solving skills.
- 2 years related drafting experience including some related design software experience.
- High school diploma.
- A.A.S. in CAD or related design engineering curriculum (preferred).
Kim-Khanh Tran | Sr. Service Manager Ledgent & Ultimate Staffing Services 3945 Freedom Circle Suite 220 Santa Clara, CA 95054 (T) 408.330.6990 (F) 408.988.8460 ktran@ultimatestaffing.com | www.ultimatestaffing.com We love to create remarkable experiences… every person, every time.®
March 16, 2010
Job– We are looking for someone who will be responsible for drafting and coordinating multiple set drawings for electrical projects. Created 3D Models in lighting, power, utility and fire alarm equipment etc.
HOT ORDER! Excellent Benefits! Company est. in 1919
We are looking for someone who will be responsible for drafting and coordinating multiple set drawings for electrical projects. Created 3D Models in lighting, power, utility and fire alarm equipment etc.
Prepared designs for utility lay outs and drafted electrical specification of lighting and power locations. Assisted in overlay and coordination drawings.
The ideal candidate must possess a minimum of 3-5 years experience with MEP 3D 2008/9 or 10 is a must. Electrical with field experience working with Electricians. Good English speaking skills. Strong knowledge of Utility, industrial, high power, electrical, power & lighting
Someone who has understanding of electrical & knows where power draws.
Lecrecia Prince
Technical Staffing Specialist
ATR Engineering
408-328-8057 Direct Line
408-328-8001 Fax
