Contact:
Judith Garcia < [email protected]>,
Looking for another qualified Mechanical Drafter (TEMP Position)
Please see attached job description – must have 3-5 yrs recent ProE (Wildfire 3.0) and AutoCAD work experience.
Judi Garcia, Recruiter
ITT Electronic Systems
Reconnaissance and Surveillance Systems, Inc.
408-201-8000 x5394
"Tina Carson"
[email protected]
Required Skills: All musts: BSME 3+ years of plastics injected molding experience 3D SOLIDWORKS on past job or couple jobs COSMOS or ANSYS
Must also have excellent communication skills. Looking for candidate to work under minimal supervision and get the project done. Best Regards,
Tina Carson, CIR, ACIR Technical Recruiter
https://www.linkedin.com/in/tinacarson" Two Roads Professional Resources, Inc. 5122 Bolsa Ave. Ste 112 Huntington Beach, CA 92649
Tel: 714-901-3804 x23 Fax: 714-901-3814
Toll Free: 877-427-6237, x23 8:30am - 5:30pm PST, M-F
CONTACT:
Judi Garcia, Recruiter
ITT Electronic Systems
Reconnaissance and Surveillance Systems, Inc.
408-201-8000 x5394
We are looking for a Mechanical Drafter for contract assignment, min 5 years of mechanical drafting experience, with min. 3 yrs of ProE and AutoCAD. AS degree preferred. US Citizenship required for defense contractor.
If you know anyone qualified and available to interview and start as soon as possible, please forward resumes to my attention. One opening, possibly 2.
Thanks for your attention.
Judi
"Garcia, Judith"
Judi Garcia, Recruiter
ITT Electronic Systems
Reconnaissance and Surveillance Systems, Inc.
408-201-8000 x5394
Kelly Kramer, CSP, CAC
Phone: 925.831.8551
Toll: 800.285.5627
Fax: 925.831.0265
My name if Kelly Kramer and I am a Recruiter with The Plus Group. I am looking for a Sr Mechanical Engineer (CAD but preferably PRO-E), someone with at least 3 yrs medical device experience. Location is Hayward . Description below.
Description: Looking for a top talented individual to fill the Sr. Mechanical Design Engineer position where we're dedicated to enhancing the life of men and women who want naturally younger looking skin. This engineer researches, plans, and designs mechanical and electro-mechanical systems and products. He/she will also direct and coordinate activities involved in the design, documentation, fabrication, operation, application, installation, test, and repair of mechanical or electromechanical products and systems by performing the duties outlined below.
Primary Responsibilities and Duties:
Note: The following primary responsibilities are meant to be representative but not necessarily all inclusive of the duties and responsibilities for this position title.
• Research and analyze data such as customer requests and specifications to determine feasibility of design.
• Specify, design and document systems and products such as instruments and disposables, considering performance, patient safety, regulatory requirements, patents, and corporate goals.
• Work closely with other departments to ensure projects conform to all regulatory and quality regulations.
• Interface with electrical and software resources as part of a cross-disciplinary design team.
• Prototype designs using a variety of prototyping methodologies including SLA , RTV molds, FDM, machining, model making, gluing and painting.
• Organize, plan, lead and manage team projects in alignment with project goals.
• Aid in setting the strategy for the R&D; department.
• Develop/improve products to ease manufacturing processes.
• Stay up-to-date and follow all procedures related to this job that can affect the quality of products or services provided to our customers.
Experience, Education, Training Skills and Traits:
• BS or MSME plus ten years experience designing electromechanical systems.
• Minimum of three years in a medical device environment is preferred. Similarly, highly regulated fields may also be considered such as aerospace.
• Experience with heat transfer and thermal analysis a bonus.
• Five to ten years experience designing using CAD, preferably proficient with Pro/E.
• Proven track record of successful product development using a variety of design tools and prototyping techniques.
• Working knowledge of project planning and management including use of PM software such as MS Project.
• Ability to focus on and achieve scheduled milestones, including contingency planning.
• Knowledge of FDA Quality System and Design Control requirements and their application to projects from design inception to manufacturing release.
• Strong team-working and communication skills.
• A drive to get the job done in the face of obstacles and time constraints, and a willingness to jump in wherever needed.
• Competent using office software including MS Word, Excel, Internet Explorer and Outlook.
Regards,
Kelly Kramer, CSP, CAC
Phone: 925.831.8551
Toll: 800.285.5627
Fax: 925.831.0265
Please contact the hiring company directly- do not respond to this email.
_________________________________________________________________________________
Marlena Govaars, Corporate Recruiter
Infineon Technologies
640 N. McCarthy Blvd.
Milpitas, CA 95035
Voice 408/ 503-2675
Fax 408/ 503-2813
We have an opening in our Morgan Hill office, for a Junior Drafter – this is a technical/ engineering position, and we’re looking for a full-time schedule, so it’s probably most appropriate for folks who are taking evening classes. However, the need is great, so the manager may be interested in candidates if they require a slightly alternative schedule.
EXPERIENCE Infineon! As a TOP 10 semiconductor COMPANY worldwide - we commit to understanding our customers needs and to delivering best-in-class solutions, we partner for success, we innovate new technology to enhance your life and we create value in bringing global competence and satisfaction to every customer, every day. Headquartered in Germany , Infineon has a global presence, operating through its subsidiaries in North America from Milpitas , CA , in the Asia-Pacific region from Singapore and in Japan from Tokyo . We are a company that focuses on the latest trends in energy efficiency, mobility and connectivity, security and safety, and on improving its customers' competitiveness in the market. From smarter automotive and industrial systems to leading-edge wired and wireless communications, Infineon never stops thinking about ways to help you succeed.
Junior Drafter
Our RF Power Group in Morgan Hill , California , is seeking to hire a Junior Drafter.
Responsibilities:
- Create drawings from sketches, red line drawings, and working with support application engineers on design and documentation projects as needed
- Develop and prepare multi-dimensional layouts and detailed drawings of the semiconductor devices from schematics and related geometry provided by design engineering.
- Work will be completed through use of CAD or other computerized equipment.
- Checks dimensions, writes specifications, and verifies completed drawings, artwork or digitized plots.
- Check design layouts and detailed drawings.
Requirements:
- 1 year experience with AutoCAD or schooling
- Excellent communication skills, (written, and verbal)
- Strong attention to details, highly organized, computer literate
- Ability to work well in a fast-paced professional office environment
This is a salaried, full-benefits position; this is not an internship. The pay depends on skill & level of experience, but starts around $45,000.
The position is in our RF Power Amplifier group. The manager and the group are very easy to work with; the immediate need is for and Autocad drafter, but there is room to learn more as time goes by.
It’s the first Morgan Hill exit off of 101, and would of course be reverse-commute for anyone coming from San Jose .
Please let me know if you have any questions.
Thank you!!
Regards,
Marlena.
Marlena Govaars, Corporate Recruiter
Infineon Technologies
640 N. McCarthy Blvd.
Milpitas, CA 95035
Voice 408/ 503-2675
Fax 408/ 503-2813
